AltaCV | NicolasOmar Fork
Last Updated:
2 years ago
License:
LaTeX Project Public License 1.3c
Abstract:
A forked version of AltaCV template with Light/Dark mode
\begin
Discover why over 20 million people worldwide trust Overleaf with their work.
A forked version of AltaCV template with Light/Dark mode
\begin
Discover why over 20 million people worldwide trust Overleaf with their work.
%%%%%%%%%%%%%%%%%
% This is an sample CV template created using altacv.cls
% (v1.3, 10 May 2020) written by LianTze Lim (liantze@gmail.com). Now compiles with pdfLaTeX, XeLaTeX and LuaLaTeX.
% (v1.7.1b, 11 Jan 2024) forked by Nicolás Omar González Passerino (nicolas.passerino@gmail.com)
%
%% It may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.3
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.3 or later is part of all distributions of LaTeX
%% version 2003/12/01 or later.
%%%%%%%%%%%%%%%%
%% If you need to pass whatever options to xcolor
\PassOptionsToPackage{dvipsnames}{xcolor}
%% If you are using \orcid or academicons
%% icons, make sure you have the academicons
%% option here, and compile with XeLaTeX
%% or LuaLaTeX.
% \documentclass[10pt,a4paper,academicons]{altacv}
%% Use the "normalphoto" option if you want a normal photo instead of cropped to a circle
% \documentclass[10pt,a4paper,normalphoto]{altacv}
%% Fork (before v1.6.5a): CV dark mode toggle enabler to use a inverted color palette.
%% Use the "darkmode" option if you want a color palette used to
% \documentclass[10pt,a4paper,ragged2e,withhyper,darkmode]{altacv}
\documentclass[10pt,a4paper,ragged2e,withhyper]{altacv}
%% AltaCV uses the fontawesome5 and academicons fonts
%% and packages.
%% See http://texdoc.net/pkg/fontawesome5 and http://texdoc.net/pkg/academicons for full list of symbols. You MUST compile with XeLaTeX or LuaLaTeX if you want to use academicons.
%% Fork v1.6.5c: Overwriting sloppy environment to ignore any spaces and be used to solve overlapping cvtags
\newenvironment{sloppypar*}{\sloppy\ignorespaces}{\par}
% Change the page layout if you need to
\geometry{left=1.2cm,right=1.2cm,top=1cm,bottom=1cm,columnsep=0.75cm}
% The paracol package lets you typeset columns of text in parallel
\usepackage{paracol}
% Change the font if you want to, depending on whether
% you're using pdflatex or xelatex/lualatex
\ifxetexorluatex
% If using xelatex or lualatex:
\setmainfont{Roboto Slab}
\setsansfont{Lato}
\renewcommand{\familydefault}{\sfdefault}
\else
% If using pdflatex:
\usepackage[rm]{roboto}
\usepackage[defaultsans]{lato}
% \usepackage{sourcesanspro}
\renewcommand{\familydefault}{\sfdefault}
\fi
% Fork (before v1.6.5a): Change the color codes to test your personal variant on any mode
\ifdarkmode%
\definecolor{PrimaryColor}{HTML}{C69749}
\definecolor{SecondaryColor}{HTML}{D49B54}
\definecolor{ThirdColor}{HTML}{1877E8}
\definecolor{BodyColor}{HTML}{ABABAB}
\definecolor{EmphasisColor}{HTML}{ABABAB}
\definecolor{BackgroundColor}{HTML}{191919}
\else%
\definecolor{PrimaryColor}{HTML}{001F5A}
\definecolor{SecondaryColor}{HTML}{0039AC}
\definecolor{ThirdColor}{HTML}{F3890B}
\definecolor{BodyColor}{HTML}{666666}
\definecolor{EmphasisColor}{HTML}{2E2E2E}
\definecolor{BackgroundColor}{HTML}{E2E2E2}
\fi%
\colorlet{name}{PrimaryColor}
\colorlet{tagline}{SecondaryColor}
\colorlet{heading}{PrimaryColor}
\colorlet{headingrule}{ThirdColor}
\colorlet{subheading}{SecondaryColor}
\colorlet{accent}{SecondaryColor}
\colorlet{emphasis}{EmphasisColor}
\colorlet{body}{BodyColor}
\pagecolor{BackgroundColor}
% Change some fonts, if necessary
\renewcommand{\namefont}{\Huge\rmfamily\bfseries}
\renewcommand{\personalinfofont}{\small\bfseries}
\renewcommand{\cvsectionfont}{\LARGE\rmfamily\bfseries}
\renewcommand{\cvsubsectionfont}{\large\bfseries}
% Change the bullets for itemize and rating marker
% for \cvskill if you want to
\renewcommand{\itemmarker}{{\small\textbullet}}
\renewcommand{\ratingmarker}{\faCircle}
%% sample.bib contains your publications
%% \addbibresource{main.bib}
\begin{document}
\name{John Doe}
\tagline{Test Developer}
%% You can add multiple photos on the left or right
\photoL{4cm}{john-doe}
\personalinfo{
\email{john_doe@email.com}\smallskip
\phone{+01-2345-678901}
\location{City, Country}\\
\linkedin{linkedinUser}
\github{githubUser}
\npm{npmUser}
\dev{devtoUser}
%\homepage{nicolasomar.me}
%\medium{nicolasomar}
%% You MUST add the academicons option to \documentclass, then compile with LuaLaTeX or XeLaTeX, if you want to use \orcid or other academicons commands.
% \orcid{0000-0000-0000-0000}
%% You can add your own arbtrary detail with
%% \printinfo{symbol}{detail}[optional hyperlink prefix]
% \printinfo{\faPaw}{Hey ho!}[https://example.com/]
%% Or you can declare your own field with
%% \NewInfoFiled{fieldname}{symbol}[optional hyperlink prefix] and use it:
% \NewInfoField{gitlab}{\faGitlab}[https://gitlab.com/]
% \gitlab{your_id}
}
\makecvheader
%% Depending on your tastes, you may want to make fonts of itemize environments slightly smaller
% \AtBeginEnvironment{itemize}{\small}
%% Set the left/right column width ratio to 6:4.
\columnratio{0.25}
% Start a 2-column paracol. Both the left and right columns will automatically
% break across pages if things get too long.
\begin{paracol}{2}
% ----- TECH STACK -----
\cvsection{TECH STACK}
%% Fork v1.6.5c: The sloppypar* environment is used to avoid tags overlapping with section width
\begin{sloppypar*}
%% Fork 1.7.1b: Now in case you want to highlight any tag, just add a '/true' property next to its text and it will change tag's text and border colors.
\cvtags{One/true, Two, Three/true, Four, Five/true, Six, Seven/true, Eight, Nine/true, Ten}
\medskip
\cvtags{Red, Yellow/true, Blue, Green/true, Violet, Orange/true}
\end{sloppypar*}
% ----- TECH STACK -----
% ----- LEARNING -----
\cvsection{Learning}
\begin{sloppypar*}
\cvtags{Uno, Dos/true, Tres, Cuatro/true, Cinco, Seis/true, Siete, Ocho/true, Nueve, Diez/true}
\medskip
\cvtags{Rojo/true, Amarillo, Azul/true, Verde, Violeta/true, Naranja, Marron/true, Blanco, Gris/true, Negro}
\end{sloppypar*}
% ----- LEARNING -----
% ----- LANGUAGES -----
\cvsection{Languages}
\cvlang{Lang 1}{Native}\\
\divider
\cvlang{Lang 2}{Basic / A2}
\bigskip
%% Yeah I didn't spend too much time making all the
%% spacing consistent... sorry. Use \smallskip, \medskip,
%% \bigskip, \vpsace etc to make ajustments.
% ----- LANGUAGES -----
% ----- REFERENCES -----
\cvsection{References}
\cvref{Prof.\ Alpha Beta}{Institute}{a.beta@university.edu}
\divider
\cvref{Boss\ Gamma Delta}{Business}{g.delta@business.com}
% ----- REFERENCES -----
% ----- MOST PROUD -----
% \cvsection{Most Proud of}
% \cvachievement{\faTrophy}{Fantastic Achievement}{and some details about it}\\
% \divider
% \cvachievement{\faHeartbeat}{Another achievement}{more details about it of course}\\
% \divider
% \cvachievement{\faHeartbeat}{Another achievement}{more details about it of course}
% ----- MOST PROUD -----
% \cvsection{A Day of My Life}
% Adapted from @Jake's answer from http://tex.stackexchange.com/a/82729/226
% \wheelchart{outer radius}{inner radius}{
% comma-separated list of value/text width/color/detail}
% \wheelchart{1.5cm}{0.5cm}{%
% 6/8em/accent!30/{Sleep,\\beautiful sleep},
% 3/8em/accent!40/Hopeful novelist by night,
% 8/8em/accent!60/Daytime job,
% 2/10em/accent/Sports and relaxation,
% 5/6em/accent!20/Spending time with family
% }
% use ONLY \newpage if you want to force a page break for
% ONLY the current column
\newpage
%% Switch to the right column. This will now automatically move to the second
%% page if the content is too long.
\switchcolumn
% ----- ABOUT ME -----
\cvsection{About Me}
\begin{quote}
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.
\end{quote}
% ----- ABOUT ME -----
% ----- EXPERIENCE -----
\cvsection{Experience}
\cvevent{Charge}{Company}{Mm YYYY -- Mm YYYY}{City, Country}
\begin{itemize}
\item First achievement
\item Second achievement
\item Third achievement
\end{itemize}
\divider
\cvevent{Charge}{Company}{Mm YYYY -- Mm YYYY}{City, Country}
\begin{itemize}
\item First achievement
\item Second achievement
\item Third achievement
\end{itemize}
% ----- EXPERIENCE -----
% ----- EDUCATION -----
\cvsection{Education}
\cvevent{Title}{Institution}{Mm YYYY -- Mm YYYY}{City, Country}
\begin{itemize}
\item GPA: 1,23
\end{itemize}
\divider
\cvevent{Title}{Institution}{Mm YYYY -- Mm YYYY}{City, Country}
\begin{itemize}
\item GPA: 1,23
\end{itemize}
% ----- EDUCATION -----
% ----- PROJECTS -----
\cvsection{Projects}
\cvevent{Project 1 }{\cvreference{\faGithub}{https://github.com/user/repo}\cvreference{| \faGlobe}{https://project-demo.com/}}{Mm YYYY -- Mm YYYY}{}
\begin{itemize}
\item Item 1
\item Item 2
\end{itemize}
\divider
\cvevent{Project 2 }{\cvreference{\faGitlab}{https://gitlab.com/user/repo}\cvreference{| \faGlobe}{https://project-demo.com/}}{Mm YYYY -- Mm YYYY}{}
\begin{itemize}
\item Item 1
\item Item 2
\end{itemize}
% ----- PROJECTS -----
\end{paracol}
\end{document}